A premium refrigerated van body featuring fiberglass pultruded posts inside the roof and walls to provide the highest possible insulation value. These bodies come standard with DuraPlate® swing doors & stainless bar lock hardware, foam-filled walls with aluminum exterior and glassboard interior, stainless steel rear frame, along with a variety of floor options. Body Lengths: 10' to 28' (Inside), custom sizes available.
Body Width and Height: 96" Wide Body. Add 6" to width for 102" O.D.		Click here for Photo Gallery
Notes: Inside length based on 1/2" plywood lining on front wall, and roll-up rear door. For full rear swing-type doors, add 3 1/2" to inside body length. For 2 1/4" roll-up door, deduct 2" in opening height. Model Interior Exterior Rear Door Opening RearDoor Opening       Width Height   Width Height   Width Height   Width   Height     RA - 72   89 1/4"   72"   96”   82 1/4   89"   67 3/4"   84"   65"     RA - 78   89 1/4""   78"   96”   88 1/4   89"   73 3/4"   84"   71"     RA - 84   89 1/4".   84"   96”   94 1/4   89"   79 3/4"   84"   77"     RA - 90   89 1/4""   90"   96”   100 1/4   89"   85 3/4"   84"   83"     RA - 96   89 1/4"   96"   96”   106 1/4   89"   91 3/4"   84"   89"     RA - 102   89 1/4"   102"   96"   112 1/4   89"   97 3/4"   84"   95"     "Front"- Heavy 7 gauge reinforced steel frame supports any model refrigeration unit, aluminum corner castings, 5" radius front nose and corners, heavy-duty .040" aluminum sheet, fiberglass pultruded posts, 4" foamed in-place non-CFC polyurethane insulation, .090" seamless glassboard interior.   "Side Walls"- Heavy-duty .040" aluminum sheet, fiberglass pultruded "Z" posts on 16" centers, additional posts at high stress areas, 3" (standard) or 4" poured polyurethane insulation, seamless glassboard (fastener-free) interior.   "Floor" - Extruded aluminum hat or your choice of floor options, front and rear smooth gutters with drains, flush rear entry for forklift loading, 4" (standard) poured polyurethane insulation, composite stringers.   "Crossmembers" - 3" hi-tensile "C" channel steel on 12" centers, alternating crossmembers gusseted to longitudinals.   "Roof" - Thick .032" one-piece aluminum sheet, fiberglass pultruded "Z" posts on 24" centers, 3" (standard) or 4" polyurethane insulation, .090" seamless glassboard interior.   "Side Door" - DuraPlate exterior skin, poured foam filled, .090" glassboard interior lined, internal reinforcement at header and sill, stainless steel hinges, stainless steel grab handle. Standard curbside door is 36" x 67" on 72" high bodies and 36" x 73" on all other heights.   "Rear Frame" - Heavy-duty stainless steel, 12 gauge posts and header, 7 gauge sill.   "Rear Door" - DuraPlate swing doors, 3" poured insulation, .090" glassboard interior, heavy duty extruded aluminum hinges on swing doors. Roll-up insulated doors ordered to spec.   "Scuff Plate" - 6" high extruded aluminum, standard, with additional heights available in 6" increments.   "Liner" - 090" seamless glassboard (fastener-free) on all interior sides, front, and ceiling.   "Electrical" - All wiring enclosed in conduit for easy access, plus heat shrink wire connections at all ends help seal out moisture.   "Interior Lighting" - Rapid cold-start fluorescent dome light, recessed in a sealed, insulated enclosure.   "Exterior Lighting" - Marker lights recessed in roof cove with exterior wiring in protective groove. Reflectors installed as required with FMVSS.   "Reefer Unit" - Customer choice of brands.   "Mounting" - Under body filler strips are steel banded to top of chassis frame rails. Zinc plated U-bolts are placed though crush pipes (between frame rails) to hold body in-place tighter, longer, and to prevent bending of frame rails. Structural steel "side standards" are welded to longitudinals to prevent shifting side-to-side   "Undercoating" - Petrol based coating used on full understructure.   Side and Rear Swing Doors We custom build our side and rear swing doors to ensure a precise fit and positive closing. We use only DuraPlate® exterior skins, foam injected insulation in our state-of-the-art press, and .090" glassboard for the interior liner. Internal reinforcement at header and sill add even more stability, and premium hinges and grab handles add extra reinforcement for rough service applications. The standard curbside door is 36" x 67" on 72" high bodies and 36" x 73" on all other heights. Duraplate is an efficient, lightweight, and incredibly strong panel that provides exceptional resistance to damage, leaks, and corrosion. With skins composed of 80,000 psi yield steel, the DuraPlate panel resists scrapes, punctures, buckling, and permanent deformation. The polyethylene core and the bond between the skins and core form an added barrier that won't deteriorate and is impervious to water.         Cab mounted service platform   Body mounted service platform   "Side doors"- See drawings above   "Rear doors" - See drawings above   "Rear bumpers" - See below   "Scuff plate" - Available in 6" increments (6" extruded aluminum is standard)   "Floors" - See drawings above.   "Logistics" - E-track, surface mount or recess.   Liftgate installations   Wheel housings   Polished stainless steel front corners, roof radius, and chrome cast front corner caps   Bumper Options           Highest Thermal Insulation Value - Thick fiberglass pultruded posts inside the roof and walls provide solid construction and the highest insulation capability - more foam coverage inside the wall with no metal posts to transfer heat or cold.   Engineered Food-Safe - No wood used anywhere in the ceiling, walls, floor, or doors to hold moisture or bacteria - just wash, rinse, and sanitize.   DuraPlate® (by Wabash) Swing Doors - Tough DuraPlate exterior panels, foam filled, glassboard interior.   Premium Appearance Package - Stainless steel rear frame, aluminum wall construction, corrosion-resistant stainless and aluminum fasteners, premium hinges - designed for long, trouble-free service.   Reefer Unit - Customer choice of brands.